JEWELRY CARE

Ring Care Guide

Fine jewelry is made to be worn, but a little care goes a long way. Use this guide to keep your diamond ring clean, secure and looking its best, from everyday wear to at-home cleaning and long-term maintenance.

EVERYDAY CARE HOW TO CLEAN CHECK YOUR RING

EVERYDAY CARE

Four Habits That Protect Your Ring

Most wear happens during ordinary daily activities. These simple habits help protect the setting, metal and diamond from unnecessary knocks, residue and damage.

Take It Off for Hands-On Tasks

Remove your ring before exercise, gardening, heavy lifting, DIY, cleaning, swimming or any activity where it may be knocked, compressed, scratched or exposed to chemicals.

Keep It Away From Harsh Chemicals

Avoid bleach, chlorine, strong household cleaners and abrasive products. Apply perfume, lotion, sunscreen and hair products before putting your ring on.

Store It Separately

Keep your ring in a soft-lined box or pouch when you are not wearing it. Store pieces separately so diamonds and metal surfaces do not rub against other jewelry.

Check the Setting Regularly

Look closely at the prongs and stones from time to time. If a stone moves, a prong looks lifted, or the ring catches unexpectedly on fabric, stop wearing it and have it checked.

AT-HOME CLEANING

How to Clean Your Diamond Ring

For routine care, a gentle hand-clean is usually all you need. Avoid harsh chemicals and abrasive methods, especially around delicate settings.

Soak in Warm, Mild Soapy Water

Add a small amount of mild dish soap to a bowl of warm—not hot—water. Let the ring soak for around 15–20 minutes to loosen oils and everyday residue.

Brush Gently

Use a very soft toothbrush to clean around the diamond, under the setting and along the band. Use light pressure and take extra care with pavé, halos and fine prongs.

Rinse Carefully

Rinse with clean lukewarm water. If you are rinsing near a sink, make sure the drain is securely closed so the ring cannot be lost.

Pat Dry With a Soft Cloth

Pat the ring dry with a clean, lint-free cloth and allow any moisture under the setting to air-dry fully before storing it.

Avoid: toothpaste, baking soda, scouring powders, abrasive polishing cloths on delicate finishes, bleach, chlorine and strong chemical cleaners.

✓

GOOD HABITS

Do

Put your ring on after lotions, perfume and hair products.
Use two hands when lifting heavy objects instead of loading pressure onto the ring.
Keep your ring in a dedicated jewelry box or soft pouch when not worn.
Clean gently when residue starts to dull the diamond.
Have the setting checked if you notice movement, snagging or a damaged prong.

AVOID

Don't

Wear your ring during gym workouts, contact sports or heavy manual work.
Expose it to bleach, chlorine or strong household chemicals.
Scrub the ring with abrasive cleaners or hard brushes.
Store diamonds loose against other jewelry where they can scratch surfaces.
Continue wearing the ring if a stone feels loose or a prong appears damaged.

SETTING-SPECIFIC CARE

Different Designs Need Different Attention

Solitaire and Prong Settings care illustration

Solitaire & Prong Settings

Prongs are intentionally fine so more of the diamond remains visible. Check for lifted, worn or uneven prongs and avoid catching the setting on knitted fabric or towels.

Pave and Halo Settings care illustration

Pavé & Halo Settings

Small diamonds are held by tiny beads or prongs. Use only a soft brush and light pressure. If any stone looks uneven or missing, stop wearing the ring until it is checked.

Eternity Bands

Stones continue around the band, so the setting is exposed on the palm side as well as the top. Take extra care with hard surfaces and heavy gripping activities.

Bezel Settings

A bezel surrounds more of the diamond edge, but the ring can still collect oils and residue underneath. Clean gently around the opening and dry thoroughly.

WHEN TO STOP WEARING IT

Small Changes Are Worth Checking

If something feels different, avoid wearing the ring until you know the setting is secure. Continuing to wear a damaged setting can make the problem worse.

A diamond or accent stone moves when touched very gently.

A prong looks lifted, bent, worn down or no longer symmetrical.

The setting starts catching on fabric more often than usual.

The band is visibly bent, dented or distorted after an impact.

You notice a gap, missing accent stone or other sudden change.

LONG-TERM CARE

Professional Cleaning & Inspection

Home cleaning removes everyday residue, but it does not replace a close inspection of prongs, settings and structural wear. Consider having a fine jewelry professional inspect your ring periodically, especially if it is worn every day or has been knocked.

If your ring needs attention, contact us before using strong cleaning methods, polishing compounds or home repair techniques.

ASK ABOUT RING CARE

RING CARE FAQ

Good to Know

How often should I clean my diamond ring?

Clean it when oils and residue begin to dull the diamond or collect around the setting. For a ring worn daily, a gentle clean every few weeks is a practical routine, with extra cleaning after heavy exposure to lotions or products.

Can I shower with my ring on?

Water itself is not the main concern, but soaps, conditioners and body products can leave residue around the diamond and setting. Removing your ring also reduces the chance of it slipping off or being knocked against hard surfaces.

Can I swim with my ring?

We recommend removing fine jewelry before swimming. Chlorinated water, saltwater, activity and the possibility of a ring becoming loose on a cold finger all make swimming an unnecessary risk.

Can I use an ultrasonic cleaner?

Ultrasonic cleaners are not suitable for every ring. Their vibration can be a concern for loose stones, delicate pavé, damaged settings or certain gemstones. If you are unsure about the condition or construction of your ring, use the gentle hand-cleaning method above or ask a professional first.

Why does my diamond sometimes look cloudy or dull?

Diamonds attract oils easily. Lotion, soap, skin oils and everyday residue can coat the surface and reduce sparkle even when the diamond itself is perfectly fine. A gentle clean often restores its appearance.

Can my 18K gold ring scratch?

Yes. Fine metal surfaces naturally develop small marks with wear. Avoid storing rings loose together and remove them for activities that create repeated impact or friction. Polishing can change the surface finish, so professional advice is best when you want to restore the finish.

What should I do if a stone feels loose?

Stop wearing the ring and store it safely until it can be inspected. Avoid testing or moving the stone repeatedly, as this may place additional stress on the setting.

NEED ADVICE?